Installation Process

At Starlink Installs, we have established the industry standard when it comes to quality and durability of installation.

Our technicians follow a structured and reliable process to ensure consistent quality across all installations.

The system has been outlined in the diagram below.

1. SURVEY

Assess installation site in relation to technician access, signal strength, safety, cable routes, mounting possibilities and preferred router/modem location. If there are viable installation options, our technician can liaise with you to confirm the installation and planning can begin.

2. PLAN

Select optimum mount to use for the Starlink dish, and the most efficient cable route from the dish to the interior router. Devise the best positioning for the interior cable wall outlet and Starlink router prior to installation.

3. INSTALL

Firmly mount the Starlink dish to the roof or wall of the building. Drill necessary holes through the roof and/or walls for the Starlink’s cable to pass through. Any exterior cable must be firmly pinned down. Feed the cable into the building and waterproof the entry holes. Cut out and install an interior wall outlet near the Starlink routers position, whereby the cable will pass through into the house’s interior.

4. SET-UP

Connect the Starlink router and dish cable to the power block, then plug the power block into a power outlet inside. Download the Starlink app and follow the prompts to set up the network connection.

5. TEST

Run a speed test to check the download and upload speed. Internet connection must be fast and effective before leaving the install site. Welcome to Starlink’s rapid internet connection!

安装过程

在 Starlink Installs，我们在安装质量和耐用性方面建立了行业标准。

我们的技术人员遵循结构化且可靠的流程，以确保所有安装的质量一致。

下图概述了该系统。

调查

评估安装地点的技术人员访问权限、信号强度、安全性、电缆路线、安装可能性和首选路由器/调制解调器位置。如果有可行的安装选项，我们的技术人员可以与您联系以确认可以开始安装和规划。

计划

选择用于 Starlink 碟形天线的最佳安装座，以及从碟形天线到内部路由器的最有效的电缆路线。在安装之前，为内部电缆墙壁插座和 Starlink 路由器设计最佳位置。

3.安装

将 Starlink 碟形天线牢固地安装到建筑物的屋顶或墙壁上。在屋顶和/或墙壁上钻必要的孔，以便星链电缆穿过。任何外部电缆都必须牢固固定。将电缆引入建筑物并对入口孔进行防水处理。在 Starlink 路由器位置附近切出并安装一个内墙插座，电缆将通过该插座进入房屋内部。

设置

将 Starlink 路由器和碟形电缆连接到电源块，然后将电源块插入内部电源插座。下载 Starlink 应用程序并按照提示设置网络连接。

测试